6 ft. L x 25 in. D Finished Engineered Birch Butcher Block Countertop

The 6 ft. L x 25 in. finished engineered birch butcher block countertop delivers a stable, ready-to-install wood surface that fits standard cabinetry without requiring on-site sanding or sealing.

Engineered Construction & Dimensions

Built from layered engineered birch, this slab combines the clean grain and knife-friendly density of hardwood with dimensional stability that resists cupping and twisting during temperature shifts. The 25-inch depth clears typical 24-inch base cabinet fronts while providing ample toe-kick clearance and workspace. At 6 feet long, it spans standard run lengths, though multiple pieces can be joined for larger layouts using manufacturer-approved seam techniques.

Factory-Applied Finish

Each panel arrives pre-finished, eliminating the initial sanding and sealing cycle. The protective top coat guards against everyday moisture, heat marks, and food prep residue. Light scuffing with fine-grit sandpaper followed by food-safe mineral oil restores the surface after prolonged chopping and wiping.

Installation & Compatibility

The straight-edge profile aligns flush with standard cabinet frames. Sink, cooktop, and appliance cutouts are measured directly from the finished face before securing. Fasten using concealed mounting brackets or cleats attached to the underside, then seal the backsplash joint to shield the engineered core from moisture.

Routine Maintenance

• Wipe spills immediately with a damp cloth; never allow water to pool on the surface
• Protect cutout edges and seams from prolonged wet exposure
• Apply food-grade mineral oil periodically to refresh the factory coating and preserve the wood fibers

Replacing fragile laminate strips and competing with heavier stone alternatives at lower material cost, this countertop provides genuine wood warmth, easy repairability, and uninterrupted workspace for daily meal preparation.